Not all projects are the same and not all designers want the
same finish.
With this in mind we have created a large range of frame
options. Some of these variations are shown on this page.
•
Besides the usual open back frame sections we offer an extra
heavy version along with narrow and nailing fin frames.
•
When
fixing large heavy doors you need a frame strong enough
to support the weight and have enough strength (wall
thickness) to accept door hinge fixings.
•
The
sill transom is offered in the common open back version
and a double tubular version for added dead load torsional
strength.
The double tubular transom has a drip mould on the
lower external corner to force water off the framing.
•
All
sills have a built-in sump area to catch and drain
water away from the glazing pocket area.
•
The
tubular corner mullion has been designed to do the
job professionally rather than work out the cheapest
way to get around the corner.
Home
