We have two transom types for highlights over Bi-fold doors. Both types are a clean snap fit.
Typical examples of transom strengths (servicability ratings) shown below:
|
Frame overall |
Door |
Frame overall |
Light |
Heavy |
|
Height |
Height |
Width |
Transom |
Transom |
|
3000mm |
2400mm |
3600mm |
917Pa |
1866Pa |
|
3000mm |
2400mm |
4200mm |
558Pa |
1282Pa |
|
3000mm |
2400mm |
4800mm |
- |
837Pa |
|
3000mm |
2400mm |
5400mm |
- |
578Pa |
Based on a maximum allowable metal deflection of 1/180.
"-" Denotes that value is less than 500Pa which is not suitable for any location in Australia.
For other ratings contact your local AWS fabricator or design@awscommercial.com.au.
The light transom is fabricated by snapping a pocketed filler to the Bi-fold head as shown left.
For wider openings and or transoms that are subject to higher wind loads we have a heavy duty transom. The box stiffener can project to the outside or inside as required.
In all highlight transom versions the top roller guide doubles as a drip mould to protect the top of the doors from water intrusion.
The illustration lower left shows how we produce a lowlight transom for Bi-fold windows.






