|
•
|
The
AWS double glazed FrontGLAZE™ framing is designed
to accept 24mm insulating glass units (IGU’s) positioned
close to the front face. We have successfully tested this
system to 600Pa water resistance making the product suitable
for exposed locations. There are two frame sizes 102mm
(Series 426) covering most applications and the 150mm
(Series 626) for over size units. There are mullion
span charts
for both systems later in this section.
The following pages
will highlight what we see as the main features with this
product. |
|
•
|
We offer several transom
/ sill options with glazing beads on
the outside or inside. All variations with their features
and limitations are shown in this section. |
|
•
|
One
of the features you will notice when scrolling through
the FrontGLAZE™ pages is the lack of visible drainage
holes on the front face. We have concealed these holes
in the front drip groove to enhance the visual appearance
and improve water resistance. |
|
•
|
FrontGLAZE™
has been designed to accept awning/casement both facing and
non-facing sashes. Both types including hardware options
are shown later in this section. |
|
•
|
|
