• |
Configurations:
This allows us to offer very large conventional
arrangements:
| • |
'XF'
and 'FX' - two panels. |
| • |
'FXF' - three panels with the centre panel opening. |
| • |
'XFF' and 'FFX' - three panels, side panel opening. |
| • |
'FXXF' - four panels with the centre panels opening. |
|
• |
Large Doors: SlideMASTER™ can be
fabricated in very large sizes. For example we can offer
two panel 'XF' or 'FX' doors up to 2700 x 3300mm. |
• |
Clean
Lines: All unwanted frame recesses
are closed off with flat fillers. Stiles are rounded off
to suit modern paint finishes. Double hollow meeting stiles
project out so there is nothing to catch curtains or blinds
on the inside.
|
• |
Performance:
Successfully tested for compliance with Australian Standard
AS2047, with a water resistance of 600Pa, complies with
air-condition requirements.
|
• |
Sill
Finish: We recommend that the
sill is recessed into the floor slab as detailed above.
Sub-sills should be used if you are after higher water
resistance. Refer
installation details for full fixing instructions.
For DXF/DWG installations details go to installation
& CAD files. |
• |
The SlideMASTER™ Door is also available as a corner
unit. |
|
'FX' Open & Close
|
• |
Silent Rollers:All SlideMASTER™ doors are fitted with heavy duty double
bogey rollers to ensure that doors will slide smoothly
and quietly for years to come.
|
