• |
Configurations: This double track frame allows us to offer stacking type sliding doors:
| • |
'XXF' and 'FXX' - three panels with two opening. |
| • |
'FXXXXF' - six panels with four centre opening. |
|
• |
Large
Doors: SlideMASTER™ stacking
doors can also be fabricated in very large sizes. For
example we can offer three panel 'XXF' or 'FXX' doors
up to 2700 x 5100mm.
|
• |
Clean
Lines: The unused recesses in
jambs and head are closed off with flat fillers. This
dramatically improves the appearance and there are no
recesses for bugs and spiders.
|
• |
Performance:
Successfully tested for compliance with Australian Standard
AS2047, with a water resistance of 600Pa, complies with
air-condition requirements. |
• |
Sill
Finish: For the best finish and
performance we always recommend that you fit sub-sills
under the doors and recess the sill into the floor (as
illustrated above).Refe r
installation details for full fixing instructions.
For DXF/DWG installations details go to installation
& CAD files. |
• |
The
SlideMASTER™ Door is also available as a corner
unit. |
|
'FXX'
Open & Close
|
• |
Wide
Openings: The main advantage with
SlideMASTER™ stacking doors is the large opening.
For example on a door 3600mm wide the opening would be
approximately 2200mm, just over 60%.
|
