Project Images

102mm Frame

150mm Frame

Corner Opening

Glazing

Sill Threshold


Mortice Lock

Door Locks

Heavy Duty Wheels

Thermal
Transmission


Door Strength

Fixed Sidelights



Alternative:
Internal Sliding
704 SlideMASTER™
Doors

Series 702 High Performance SlideMASTER™Door Next Page



The Series 702 SlideMASTER™ is the ultimate sliding door for performance and appearance. The 702 series features sliding panels sliding on the outside tracks with free draining sills eliminating water from pooling on the inside.
Large Doors: The Series 702 SlideMASTER™ can cater for most applications. Door panels can be up to just under five square metres, this equates to a two panel door 2400mm high by 3800mm wide. We also offer SlideMASTER™ windows to match SlideMASTER™ doors.
Extra Wide Opening: Stacking sliding doors open to approximately two-thirds of their width compared to standard sliding door which opens to less than half its width. Two sliding panels stack in front of the third fixed panel.
Two Stacking Options: They come as either a three panel unit, with stacking panels, or as a six-panel unit, with two panels moving towards one jamb and two towards the other.
Glazing: The SlideMASTER™ will accept single glazing up to 10.38mm laminated plus 20mm and 24mm insulating glass units (IGU's).
Very High Performance: We have successfully tested doors for compliance with Australian Standard AS2047 with a water resistance rating of 600Pa.
There are meeting stiles to allow us to offer large doors in most exposed applications in Australia.

Quality Hardware: From the mortice locks to the heavy duty wheels this door has been designed for the task.
Flydoors: We can fit sliding flydoors (including stacking flydoors) on the inside.
Fixed Sidelights: FrontGLAZE™ snaps to SlideMASTER™ and has also been tested to 600Pa water.
Design Registration: SlideMASTER™ is protected by Australian Registered Design.
 

© Copyright Architectural Window Systems Pty Ltd 2006
Site Design by
Spec-Net Pty Ltd