• Accessories Home

• 135° Corner Coupler

• 90° Corner Coupler

• 'I' Coupler

• Heavy Duty Coupler

• External Flange

• 50mm Window
Couplers

• Building-in Lugs

• Paddington Trims

• Frame Extenders

• Sub-Frames

• Shopfront Couplers

 

 
Accessories Next Page

Wrap around coupler highlighted in red.

External view fixed clipped to awning
42066 - 180° Coupler
•
 This coupler is designed to join 102mm window to each other at 180° when a steel load bearing column is being used. On the examples shown below the Magnum™ awning and fixed window has been coupled to each other. The coupler also suits Magnum™ sliding and double-hung windows.
•
If you are not using a steel column consider using one of the aluminium couplers 42027 or 42030.
•
The coupler will wrap around 76mm load bearing steel column if required. Aluminium couplers/windows cannot be used to support the building over. If you are using a steel column have the strength checked by a structural engineer.
Steel columns can be positioned well before windows are fitted.
•
Clean snap together joint with no unsightly visible fasteners.
Note: remember to allow 102mm for the coupler when working out the window sizes.

Internal view awning clipped to awning
Snap fit will always look better than press metal cover plates and rivet fixings.
 

© Copyright Architectural Window Systems Pty Ltd 2003